Im selling my complete supercharger setup. It was fun and quick, probably close to a stock WRX, but I wanted more so i sold the car and bought an 04 STI. So therefore the complete setup is for sale.
I would like to keep everything as a bundle for now unless you want the supercharger without everything else. So what is included:
M62 supercharger with clutch
Brackets to mount M62 to EJ251 (ABS has to be moved about 1/2 inch and P/S reservoir has to be relocated)
All intake piping necessary including K&N filter, throttle body, remote IAC, flanges for supercharger, silicone couplers, T-clamps, ect
Custom oversize crank pulley
AWIC, recommend using this as the pipe is already bent that fits from the S/C to this specific intercooler
Gready E-manage Ultimate with 6 foot harness
Weapon R adjustable fuel pressure regulator and factory FPR delete adapter
GM 3bar MAP sensor
Cheap ebay blue digital boost/vacuum gauge
Also if you want them I have the heat exchanger for the AWIC and the water pump that I used for the AWIC setup, though I am not too impressed with either, you can have them if you want for just the cost of extra shipping.
The only things that I am not including are my A/F gauge (I recommend looking into ECU tracker to see A/F ratios for tuning) and a serp belt due to the one that I have being in bad shape.
Parts are currently painted green or black, the paint is in bad shape though and could stand to be redone.
For inspiration see by build thread:l_c99-s-supercharger-build or skids wiki page:http://www.ludicrous-speed.com lots of good info here
Asking 1200 obo, This is pretty much everything that you need to boost your NA subie. I am also willing to help the buyer as much as possibly to get this up and running.
Lots of pics on my build thread but here are a couple of everything installed.
![]()
![]()
I would like to keep everything as a bundle for now unless you want the supercharger without everything else. So what is included:
M62 supercharger with clutch
Brackets to mount M62 to EJ251 (ABS has to be moved about 1/2 inch and P/S reservoir has to be relocated)
All intake piping necessary including K&N filter, throttle body, remote IAC, flanges for supercharger, silicone couplers, T-clamps, ect
Custom oversize crank pulley
AWIC, recommend using this as the pipe is already bent that fits from the S/C to this specific intercooler
Gready E-manage Ultimate with 6 foot harness
Weapon R adjustable fuel pressure regulator and factory FPR delete adapter
GM 3bar MAP sensor
Cheap ebay blue digital boost/vacuum gauge
Also if you want them I have the heat exchanger for the AWIC and the water pump that I used for the AWIC setup, though I am not too impressed with either, you can have them if you want for just the cost of extra shipping.
The only things that I am not including are my A/F gauge (I recommend looking into ECU tracker to see A/F ratios for tuning) and a serp belt due to the one that I have being in bad shape.
Parts are currently painted green or black, the paint is in bad shape though and could stand to be redone.
For inspiration see by build thread:l_c99-s-supercharger-build or skids wiki page:http://www.ludicrous-speed.com lots of good info here
Asking 1200 obo, This is pretty much everything that you need to boost your NA subie. I am also willing to help the buyer as much as possibly to get this up and running.
Lots of pics on my build thread but here are a couple of everything installed.
