Just picked up a JDM SF5 front clip (97/98 Forester Turbo) and plan on swapping it into my 99 USDM Forester. I've familiarized myself with all the parts of the swap however have a couple last questions before I begin.
This ECU has 3 plugs and is apparently the same pinout as the EJ20k/20g pinouts found in V3/V4's.
So this swap is basically the same merge as a JDM EJ20k into an RS25, however most wiring charts on here seem to be for 2002+ USDM engines, not so much for early JDM ones.
I have most things figured out for the harness merge, but still have a few loose ends. Take a look at the chart I composed and let me know if you know whats missing from those blank slots.
This ECU has 3 plugs and is apparently the same pinout as the EJ20k/20g pinouts found in V3/V4's.
So this swap is basically the same merge as a JDM EJ20k into an RS25, however most wiring charts on here seem to be for 2002+ USDM engines, not so much for early JDM ones.
I have most things figured out for the harness merge, but still have a few loose ends. Take a look at the chart I composed and let me know if you know whats missing from those blank slots.