December 25, 2015, 6:25 pm
JDM Rear Spats - Unpainted
Good Condition
Some Adhesive from Aeroguards(can be removed, reflected in price)
Fitment:
1993-2001 Subaru Impreza RS/Outback/L Bumpers
Fits Sedan, Coupe, Wagon
DIY Link:
JDM Rear Spats on USDM Rear Bumper
$65 + Shipping
PM Me
![]()
![]()
![]()
↧
December 25, 2015, 7:51 pm
I've got a Crawford SRS-20 tuned ECU for sale, for 00-02 NA Imprezas with MAP. Reason for selling is that it never idled right in my car and I suspect that it's because its a 5MT ECU and my car is a 4EAT. I did test it out and it noticeably pulls up the higher revs when not in idle. I'm sure it'll work fine as long as you have a manual.
Here's some info I found in another thread:
SRS-20:
6500 rev-limit (from 6200 stock)
claimed hp gains of 15-20 and torque gains of 15-20 over stock
MUST USE 91 OR HIGHER OCTANE GASOLINE
Car must have the following modifications:
Headers
CATLESS exhaust (I ran a high-flow and it was no issue)
Torque box w/ 3" intake (I'm guessing a hybrid intake setup)
$200 shipped.
↧
↧
December 25, 2015, 9:01 pm
Ive got a version 4 WRX/STi Wing(spoiler) with working 3rd brake light. I am asking a firm price of 200$ plus shipping and handling&ppfees. I am willing to ship anywhere if your willing to pay for it. I accept paypal or cash only.
Has small scratches on left side of wing. Shown in pictures.
Thank you for viewing.
Text is fastest.
951.545.1880
Only thing I ask is please tell me what your interested in, Your screen name and forum. Thank you kindly.
![]()
![]()
↧
December 25, 2015, 11:02 pm
Complete running 1994 ej18. Bought the car for a few other parts. Motor runs fine it's just taking up too much room in my garage. Pick it up and its yours free!
↧
December 26, 2015, 3:29 am
Im looking at FAQ ^^ and im not seeing 97 or older. if there a change in wiring from 97 vs newer for a 2.5 sti swap?
is everything still apply? basically straight bolt on with acouple of minor parts?
also what are some peoples curb weight around with sti swap.
looking for one in street trim with a/c and heat, back seat, radio.
im trying to see if i can get some weight reduction and still be in the 2600-2700lbs or lighter with a 97 impreza with sti swap.
↧
↧
December 26, 2015, 4:44 am
Looking for a 2.2 block for as cheap as possible. Don't really matter that shape it's in, could be a bare block as well. Located near Allentown, PA.
↧
December 26, 2015, 7:34 am
I'm looking for a V5 or v6 sti wing, preferably in STM silver. I would also prefer OEM but would consider a replica if it's a good one. Must come with 3rd brake light.
If you have one, let me know how much shipped to 87124.
Thanks,
Sean
5057209702
↧
December 26, 2015, 7:35 am
I'm looking for a V5 or v6 sti wing, preferably in STM silver. I would also prefer OEM but would consider a replica if it's a good one. Must come with 3rd brake light.
If you have one, let me know how much shipped to 87124.
Thanks,
Sean
5057209702
↧
December 26, 2015, 8:47 am
Hi everyone. I just bought a 98 OBS and found that my rocker panels, near where the rubber molding screws on to, are completely rusted out on both sides. Looks like I will have to cut out that piece and weld in replacements.
Does anyone know if the sedans and coupes share the same rocker panel moldings? I don't need a donor car that is exactly a wagon, do I?
↧
↧
December 26, 2015, 10:01 am
I have and wagon upper spoiler for sale, it included stage little tabs on top and bottom, came stock on OBS. $80, will ship at buyers expense
↧
December 26, 2015, 10:03 am
I have a pair of Fogflights and one of the bulbs doesn't work, just needs to be replaced, I'm asking $90, will ship at buyers expense
↧
December 26, 2015, 2:06 pm
Right now I have a shimmed 10mm. Will that suffice or should I go with an 11mm shimmed? The oil clearances are bigger than what the 10mm was supposed to see according to the FSM, but not by much
EJ20G w/ EJ257 crank - .0017 +/-.0001 main bearings
EJ257 rods .0017 +/-.0001 rod bearings
EJ20G oil squirters
non avcs v6 EJ207 heads
journal bearing vf28
air oil cooler
↧
December 26, 2015, 3:15 pm
Hello I have a 98 Impreza 2.5 Es with a 04 wrx engine swap. I'm looking to upgrade the suspension and need to buy the hubs and brakes to make the car sit wider as I'm going to eventually get a wide body kit. Will the v7 hubs and brakes fit? If so I heard the sti components will make the car sit higher so I will need to lower the car a little if thats correct. Will I need to but a Jdm lowering kit or a user sti lowering kit of specific years? I'm just not sure what years v7 refers to I'm new to subarus.
↧
↧
December 26, 2015, 4:40 pm
Looking for the upper dash pocket for a 2000 RS 2.5 Impreza. Thanks, Ralph
↧
December 26, 2015, 4:42 pm
I'm looking for center console dash for the radio for my 2000 RS 2.5..I was replacing my radio and cracked mine. Thanks, Ralph
↧
December 26, 2015, 6:08 pm
I have a set of raceland coilover. Its in good conditioner. I think i adjusted wrong when I first got it. It was making a squeaky noise when the car go over the bumps. I don't know how to adjust it back. So my ears are getting tired of it. Im letting it go for 150 pick up in CA 92056 or I can ship it for additional 40 bucks. Oh I cant find the perchs to adjust the coilover. So you have to use flat scew driver or get one from ebay for cheap price.
Pm me for quicker respond back.
Thanks.
↧
December 26, 2015, 8:17 pm
I have these locking lug nuts for sale that I no longer need since I have new ones. These ones I have for sale have been bead blasted and have gotten the chrome plate taken off them...but still work good. No damage that I can see and no rust on them either.
I'm asking $10 shipped via USPS. PM me if interested.
Gorilla Automotive 61621 Acorn Gorilla Guard Locks (12mm x 1.25 Thread Size)
↧
↧
December 26, 2015, 9:20 pm
Should I buy v7 hubs with calipers? 06 4 and 2 pot? What would you spend the money on? 98 2.5rs 2 door with 04 ej20
↧
December 27, 2015, 12:29 am
Hey guys, I finally pulled the trigger on a sports/22B bumper for my widebody. There doesn't seem to be any 22B fogs out there for sale and Id like to have a set when Im all done the bumper install. I've got a like new pair from my RS bumper. Has anyone done this swap with Fogs or know where to get some that will fit?
↧
December 27, 2015, 3:34 am
Ive got a interior parts for sale. Everything is OBO and I am willing to ship anything to almost anywhere if you pay the shipping+paypal fees.
I accept Paypal,Cash only.
For Faster reply: Please text 951.545.1880 with this website name,Screen name and part needed. I get tons of text messages from forums,craigslist,etc...
Thank you kindly & Happy Holidays!
RS Coupe rear plastics on the left & right. 25$ each (40$ for both+S&H)
Center Console: 100$
X2 driverside under rear seat plastics sedan(not sure coupe) 20$ each
Front Driverside plastic. 20$
Passenger sunvisor 15$
![]()
↧
